Start » Product survey
Scope of application
- 9 DUTs of the same type can be tested simulaneously 1
- Functional testing of energy meters 1
- Testing of AC charging stations for electric vehicles 1
- Testing of DC charging stations (quick charging stations) for electric vehicles 2
- Testing of DC meters 4
- Testing of energy meters 7
- Testing of Smart Meters 6
- 6 CTs under test of the same type can be tested simulaneously 1
- Adapter for quick and proper connection of current and voltage between meter with a Meter Test System 1
- Application as primary standard for metrological institutes and test laboratories 3
- Application as reference standard for metrological institutes or as transfer standard for test laboratories of power utilities and electricity meter manufacturers 1
- Application for testing up to 20 electricity meters 2
- Application in stationary Instrument Transformer Test Systems 2
- Application in stationary ZERA Meter Test Systems 29
- As a single unit it can only be used for insulation testing 1
- Automatic control 1
- Breaker test (optional) 5
- Burden measurement (optional) 5
- Combined with a power source system e.g. MTS140 this test bench is used as a single-phase meter test system with 40 test positions. 1
- Combined with a power source system e.g. MTS310 this test bench is used as a three-phase meter test system with 10 test positions. 1
- Combined with a power source system MTS310 this test bench is used as a three-phase meter test system with the digital measuring system STM4000/6000 1
- Combined with a power source system e.g. MTS320 this test bench is used as a three-phase meter test system with 20 test positions. 1
- Combined with an integrated power source system e.g. MTS710 this test bench is used as a DC meter test system with max. 8 test positions. 1
- Combined with a power source system e.g. MTS340 this test bench is used as a three-phase meter test system with 40 test positions. 1
- Combined with a power source system e.g. MTS750 this test bench is used as a DC meter test system with max. 40 test positions. 1
- Combined with a power source system MTS301 this test bench is used as a three-phase meter test system. 1
- Connection via STM4000 1
- Connection via STM6000 1
- Error indication via additional DSA400 1
- For testing single-phase meters, one ICT can be used for testing max. three meters 6
- For testing three-phase meters there is one ICT required for each test position 6
- Manual control 1
- Max. 6 modules can be used per test position/meter 7
- On-site measurement (without mains supply) of charging stations of electric vehicles 5
- On-site measurement with load simulation 3
- On-site measurement with system load 13
- On-site testing 1
- On-site testing of the most important meter values and preparation for further installations to a Smart Meter Gateway SMGw 1
- One module is required per test position/meter 14
- One MSVT serves for max. 20 test positions with single-phase meters 1
- Only usable at EDL meter and Basiszähler (electrical energy meter) 1
- Only usable at electronic meters 1
- Only useable in combination with DS421 1
- Power supply via mains plug or battery pack 4
- Scanning head suspension for TK325 2
- Scanning head suspension for TK326 1
- Scanning of Ferraris meters or electronic meters with LED 2
- Several devices can be combined in one Meter Test System 1
- Simulation of load while testing meter installations on-site 7
- Single position or multi position suspension 2
- Special carrier serves for a proper fitting of the CTs under test 1
- Testing of circuit breakers with magnetic release 1
- Testing of circuit breakers with thermic release 2
- Testing of conventional current transformers 2
- Testing of conventional voltage transformers 2
- Testing of electronic and non-conventional, digital current transformers 1
- Testing of electronic and non-conventional, digital voltage transformers 1
- Testing of Current Transformers (CT) 8
- Testing of Miniature Curcuit Breaker (MCB) and Molded Case Circuit Breaker (MCCB) 1
- Testing of single- or three-phase meters with closed link 6
- Testing of single-phase meters with closed link 1
- Testing of Voltage Transformers (VT) 7
- This scanning head can only be used in combination with a scanning head suspension - advanced system. 1
- This scanning head can only be used in combination with a scanning head suspension - basic system. 1
- Use in combination with a Standard Voltage Transformer SVT for accuracy testing of Voltage Transformers 1
- Using the mains frequency 1
- Can be combined with every type of DS device 2
- Can be combined with STM4000/STM6000 3
Lastbereich
