For example, together with an integrated source system MTS710, it forms a DC meter test system with a maximum of 8 measuring stations

Single result is displayed

Testing of AC charging stations for electric vehicles 1
Testing of DC charging stations (fast charging stations) for electric vehicles 1
Testing of DC meters 1
Testing of energy meters 1
Testing of smart meters 1
A maximum of 9 test specimens of the same type can be tested simultaneously 1
A maximum of 6 test specimens of the same type can be tested simultaneously. 1
Adapter for fast, error-free connection of current and voltage of the meter with a meter testing device 1
Use as a primary standard in metrological institutes and laboratories 1
Use as a reference standard in metrological institutes or as a transfer standard in testing centers 1
Use to test up to 20 electricity meters 1
Use in stationary transformer test facilities 1
Use in stationary ZERA meter testing equipment 1
Can only be used individually for insulation testing 1
Automatic control 1
Breaker test (optional) 1
Burden measurement (optional) 1
For example, together with an MTS140 source system, it forms a single-phase ZPE with a maximum of 40 measuring stations 1
For example, together with an MTS310 source system, it forms a three-phase meter testing facility with a maximum of 10 measuring stations 1
Together with an MTS310 source system, it forms a three-phase meter test system with STM4000/6000 digital measuring system 1
For example, together with an MTS320 source system, it forms a three-phase meter testing facility with a maximum of 20 measuring stations 1
For example, together with an MTS340 source system, it forms a three-phase meter testing facility with 40 measuring stations 1
For example, together with an MTS750 source system, it forms a DC meter testing facility with a maximum of 40 measuring stations 1
Forms a three-phase meter test device together with an MTS301 source system 1
Connection via STMx000 1
Connection via STM6000 1
Error display via additional DSA400 1
For single-phase meters, a maximum of three meters can be tested via one ICT 1
When testing three-phase meters, one ICT is required per measuring station 1
Manual control 1
Up to 6 modules can be used per measuring station/meter 1
Functional testing of energy meters 1
On-site measurements (without mains supply) of charging stations for electric vehicles 1
On-site measurement with the possibility of load simulation 1
On-site measurement with network load 1
On-site inspection 1
On-site testing of the most important meter data and preparation for subsequent connection to a smart meter gateway SMGw 1
One module is required per measuring station/meter 1
One MSVT can be used for max. 20 measuring stations with single-phase meters 1
Can only be used on EDL and basic meters according to FNN specifications LMN 1
Only usable on electronic meters 1
Can only be used in combination with a DS421 1
Power supply via external power supply or rechargeable batteries 1
Probe suspension for the TK325 1
Probe suspension for the TK326 1
Scanning Ferraris meters or electronic meters with LED 1
Several devices can be used in a meter testing facility 1
Simulation of a load during on-site testing of meter installations 1
Single or multi-user suspension 1
The test specimens are held by special workpiece carriers. 1
Testing of circuit breakers with magnetic tripping 1
Testing of circuit breakers with thermal release 1
Testing of conventional current transformers 1
Testing of conventional voltage transformers 1
Testing of electronic and non-conventional digital current transformers 1
Testing of electronic and non-conventional digital voltage measuring transformers 1
Testing of current transformers (CT) 1
Testing of miniature circuit breakers (MCBs) and molded case circuit breakers (MCCBs) 1
Testing of single- or three-phase meters with closed current-voltage connection 1
Testing of single-phase meters with closed current-voltage connection 1
Testing of voltage measuring transformers (VT) 1
This probe can only be used in conjunction with a standard probe suspension 1
This probe can only be used in conjunction with a probe suspension base 1
Use in combination with a standard voltage transformer SVT for accuracy testing of voltage measuring transformers 1
Use of the existing grid frequency 1
Voltage supply occurs via CR2020 or STR260 1
Voltage supply occurs via SCR4000 1
Can be combined with all DS devices 1
Can be combined with STM4000/STM6000 1

Multi-station DC test bench with integrated source

Test bench with 8 measuring stations DC measurement with integrated source Accuracy class: 0,1 Current generation up to 100 A (DC) Voltage generation up to 1000 V (DC)