Start » Product Overview » Pulse input: BNC 1x
Shows all 2 results
Application
- Testing of AC charging stations for electric vehicles 1
- Testing of DC charging stations (fast charging stations) for electric vehicles 1
- Testing of DC meters 1
- Testing of energy meters 1
- Testing of smart meters 1
- A maximum of 9 test specimens of the same type can be tested simultaneously 1
- A maximum of 6 test specimens of the same type can be tested simultaneously. 1
- Adapter for fast, error-free connection of current and voltage of the meter with a meter testing device 1
- Use as a primary standard in metrological institutes and laboratories 1
- Use as a reference standard in metrological institutes or as a transfer standard in testing centers 1
- Use to test up to 20 electricity meters 1
- Use in stationary transformer test facilities 1
- Use in stationary ZERA meter testing equipment 1
- Can only be used individually for insulation testing 1
- Automatic control 1
- Breaker test (optional) 1
- Burden measurement (optional) 1
- For example, together with an MTS140 source system, it forms a single-phase ZPE with a maximum of 40 measuring stations 1
- For example, together with an MTS310 source system, it forms a three-phase meter testing facility with a maximum of 10 measuring stations 1
- Together with an MTS310 source system, it forms a three-phase meter test system with STM4000/6000 digital measuring system 1
- For example, together with an MTS320 source system, it forms a three-phase meter testing facility with a maximum of 20 measuring stations 1
- For example, together with an integrated source system MTS710, it forms a DC meter test system with a maximum of 8 measuring stations 1
- For example, together with an MTS340 source system, it forms a three-phase meter testing facility with 40 measuring stations 1
- For example, together with an MTS750 source system, it forms a DC meter testing facility with a maximum of 40 measuring stations 1
- Forms a three-phase meter test device together with an MTS301 source system 1
- Connection via STMx000 1
- Connection via STM6000 1
- Error display via additional DSA400 1
- For single-phase meters, a maximum of three meters can be tested via one ICT 1
- When testing three-phase meters, one ICT is required per measuring station 1
- Manual control 1
- Up to 6 modules can be used per measuring station/meter 1
- Functional testing of energy meters 1
- On-site measurements (without mains supply) of charging stations for electric vehicles 1
- On-site measurement with the possibility of load simulation 1
- On-site measurement with network load 1
- On-site inspection 1
- On-site testing of the most important meter data and preparation for subsequent connection to a smart meter gateway SMGw 1
- One module is required per measuring station/meter 1
- One MSVT can be used for max. 20 measuring stations with single-phase meters 1
- Can only be used on EDL and basic meters according to FNN specifications LMN 1
- Only usable on electronic meters 1
- Can only be used in combination with a DS421 1
- Power supply via external power supply or rechargeable batteries 1
- Probe suspension for the TK325 1
- Probe suspension for the TK326 1
- Scanning Ferraris meters or electronic meters with LED 1
- Several devices can be used in a meter testing facility 1
- Simulation of a load during on-site testing of meter installations 1
- Single or multi-user suspension 1
- The test specimens are held by special workpiece carriers. 1
- Testing of circuit breakers with magnetic tripping 1
- Testing of circuit breakers with thermal release 1
- Testing of conventional current transformers 1
- Testing of conventional voltage transformers 1
- Testing of electronic and non-conventional digital current transformers 1
- Testing of electronic and non-conventional digital voltage measuring transformers 1
- Testing of current transformers (CT) 1
- Testing of miniature circuit breakers (MCBs) and molded case circuit breakers (MCCBs) 1
- Testing of single- or three-phase meters with closed current-voltage connection 1
- Testing of single-phase meters with closed current-voltage connection 1
- Testing of voltage measuring transformers (VT) 1
- This probe can only be used in conjunction with a standard probe suspension 1
- This probe can only be used in conjunction with a probe suspension base 1
- Use in combination with a standard voltage transformer SVT for accuracy testing of voltage measuring transformers 1
- Use of the existing grid frequency 1
- Voltage supply occurs via CR2020 or STR260 1
- Voltage supply occurs via SCR4000 1
- Can be combined with all DS devices 1
- Can be combined with STM4000/STM6000 1
Load range
